CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 44)

9145E10G NID Software User’s Manual System Configuration
Account Configuration
32
14. Allow UI Logout Of User - Gives Supervisors the ability to log users off the system. Use
the Space Bar to select Yes or No.
15. UI Login Locked State - Determines the current state of the UI Login. Use the Space
Bar to cycle between Locked and Unlocked.
16. SNMPv3 Authentication Protocol - Sets the authentication protocol for SNMPv3
access. Use the Space Bar to cycle between None, MD5, and SHA.
17. SNMPv3 Authentication Password - Used to enter the SNMPv3 authentication pass-
word. This password is not stored. It is used to generate the SNMPv3 authentication key.
Type the desired password and press Enter. Reenter the password. The password is
required to be between 8 and 15 characters. This field will be passed over if the SNMPv3
authentication protocol is set to None.
SNMPv3 Authentication Key - Displays the computed SNMPv3 authentication key. This is a field
that is shared with an SNMPv3 management application to allow authenticated protocol
exchanges.
18. SNMPv3 Privacy Protocol -The privacy protocol used for SNMPv3 access. Use the
Space Bar to cycle between None and DES.
19. SNMPv3 Privacy Password - Used to enter the SNMPv3 privacy password. This pass-
word is not stored. It is used to generate the SNMPv3 privacy key. Type the desired pass-
word and press Enter. Reenter the password. The password is required to be between 8
and 15 characters. This field will be passed over if the SNMPv3 Privacy Protocol is set to
None.
SNMPv3 Privacy Key - Displays the computed SNMPv3 privacy key. This is a field that must be
shared with an SNMPv3 management application to allow private SNMPv3 protocol exchanges.
3.4.3 Delete an Account
NOTE:An account cannot be deleted while the user is logged in. In addition,
you cannot delete the last supervisor account.
Before attempting to delete an account make sure the user is logged out. Use the following pro-
cedure to delete an account.
1. Select Delete (D) and press Enter. The first User Account will be highlighted.
2. Use the Space Bar to scroll through the user names to select the account.
3. When deletions are completed, press Esc to return to the System Configuration menu.