CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 85)

System Alarms & Logs 9145E10G NID Software User’s Manual
System Log
73/(72 Blank)
6.1.1 Log Display Filter Configuration
Sometimes it would be helpful to only look at events that occurred around a certain date, configu-
ration undertaken by a particular user, just view trap events, etc. The 9145E10G has a flexible
System Log Display Filter to turn off display of log items that are not of interest to the user.
NOTE:If the Master filter is set to OFF, no filter changes will be applied.
The Log Display Filter Configuration screen (Figure 6-3.) allows the customer to reconfigure the
log display filter settings. From the System Log screen, type S and press Enter. The Log Display
Filter Configuration screen opens. Type the item number of the filter configuration to modify and
press Enter. Use the Space Bar to cycle On/Off and Show/Hide. Type in the Date/Time Filter
Starts and Date/Time Filter Ends time(s), if desired. Type 16 to change filters 4 through 15 to
Show. Type 17 to change filters 4 through 15 to Hide. To return to the System Log, press Esc.
NOTE:Show All and Hide All settings override the settings for items 4 - 15.
Figure 6-3. Log Display Filter Configuration screen.
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G-527-2-0 V01.00 F31 01:45:14
-------------------------LOG DISPLAY FILTER CONFIGURATION-----------------------
1. Master Filter: On
Date/Time Filters: 2. Date/Time Filter Starts At: 18/01/2010 12:30:00
3. Date/Time Filter Ends At: 22/01/2010 14:30:00
User Name Filters: 4. "SYSTEM": Show
5. "admin": Show
6. Others: Hide
User Type Filters: 7. Local: Show
8. Others: Show
Event Type Filters: 9. System: Show
10. Security: Show
11. Trap: Hide
12. Configuration Change: Show
13. Action: Show
14. Configuration File Change: Hide
15. OAM Event: Show
16. Show All Event Types
17. Hide All Event Types
Select[1-17]:
---------------------------------Messages-------------------------------------