CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 91)

Utilities 9145E10G NID Software User’s Manual
Static ARP Table
79/(78 Blank)
Figure 7-4. PING Generation screen
7.6 Static ARP Table
The Static ARP table is used to define mapping between IP address and MAC address, and
assign them to a port, thus bypassing the ARP mechanism. A maximum of 10 static ARP entries
are available.
From the Utilities menu, type 7 and press Enter. The Static ARP Table screen (Figure 7-5.)
opens.
1. Add an Entry - To add an entry to the static ARP table, type 1 and press Enter.
• Type in the IP address and press Enter.
• Type in the Mac address and press Enter.
• Type in the port number and press Enter.
The address information will be added to the table.
2. Delete an Entry - To delete an entry from the Static ARP Table, type 2 and press Enter.
The first table entry will be highlighted. Use Space to scroll down the entries. Press Enter
to delete the highlighted entry. Press Esc to return to the Utilities menu.
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G-527-2-0 V01.00 F31 01:45:14
-------------------------------PING GENERATION---------------------------------
1) Ping to Address : 172.16.142.197
2) Ping from Address : Auto Selection
3) Ping Count : 25
4) Ping VLAN ID : 0
5) Ping Payload Size (40 - 9950) : 65
6) Ping DF Bit : Clear
7) Start Pinging
Select [1-7]:
----------------------------------Messages-------------------------------------