5 port based vlan control, Figure 5-11. port based vlan control screen, Port based vlan control – CANOGA PERKINS 9145E10G NID Software Version 1.0 User Manual
Page 75
Port Information
9145E10G NID Software User’s Manual
Port Configuration
63
5.2.5 Port Based VLAN Control
The Port Based VLAN Control screen (Figure 5-11.) is used to specify which VLANs, if any, are
allowed to pass through each port. The 9145E10G can be configured to support up to 100
VLANs.
From the Port Configuration screen, select Port Based VLAN Control (5) and press Enter. The
Port Based VLAN Control screen (Figure 5-11.) opens. The default setting is All VLANs Allowed.
In order to specify which VLANs will be included or excluded, use the Add, Add Range, Delete,
and Delete Range controls at the bottom of the screen. Use Esc to return to the Port Based
VLAN Control screen.
Figure 5-11. Port Based VLAN Control Screen
1. PBVC Mode - This setting determines which ports are enabled. Use the Space Bar to
select User Port Enabled Only, Net Port Enabled Only, Both Ports Enabled, or Disabled.
A setting of Disabled will allow all VLANs to pass through both ports.
2. Add - This function is used to add one VLAN ID at a time to the screen list. Enter the
VLAN ID you want to add and press Enter. The value must be between 2 and 4094.
3. Add Range - This function is used to add a group of VLAN IDs to the screen list. Enter
the group of VLAN IDs you want to add and press Enter. The value must be between 2
and 4094.
4. Delete - This function is used to remove one VLAN ID at a time from the screen list. Enter
the VLAN ID you want to remove and press Enter. The value must be between 2 and
4094.
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G-527-2-0 V01.00 F31 01:45:14
----------------------------PORT BASED VLAN CONTROL-----------------------------
Port Based VLAN Control List:
2
12
22
32
42
54
64
75
85
3
13
23
33
43
55
65
76
86
4
14
24 34
44
56
66
77
87
7 17
27
37
49
59
69
80
90
8
18
28
38
50
60
71
81
91
9
19
29
39
51
61
72
82
92
10
20
30
40
52
62
73
83
11 21 31 41 53 63 74
PBVC Mode: Disabled
Select [(1) PBVC Mode, (2) Add, (3) Add Range, (4) Delete, (5) Delete Range]:
------------------------------------Messages-----------------------------------