CANOGA PERKINS 9145E10G NID Software Version 1.0 - Manual (Page 25)

System Configuration 9145E10G NID Software User’s Manual
IP/SNMP Agent Configuration
13
3. Manager VLAN Tagging - Used to enable or disable the use of a Management VLAN.
The tags are 802.1Q compliant with an ether type of 0x8100.
4. Manager VLAN ID - When Manager VLAN Tagging is Enabled, this is used to set VLAN
Tag ID between 0 and 4094. The default settings is 0.
CAUTION: The Manager IP Address, Subnet Mask, and Gateway address
can be changed when locally or remotely connected. If chang-
ing the Management IP Configuration via remote access, you
will be automatically disconnected when the Gateway address
is changed. You will need to reconnect using the updated Man-
ager IP Address, Subnet Mask, and Gateway address.
Figure 3-3. Management IP configuration Menu
NOTE: The Test IP is used for PM and SAM testing. If PM and SAM are not
licensed, the Test IP address can not be entered.
5. Test IP Address - Used to set the IP Address for PM and SAM optional applications.
Test Subnet Mask - Used to set the Subnet Mask for PM and SAM optional applications.
6. Test Port - Used to select which port(s) allow access to the Test IP address. Parameters
include: Both User and Net Ports, Net Port Only, User Port Only, or No Ports Allowed.
7. Telnet Security - Used to enable or disable checking if the host initiating the Telnet ses-
sion is listed in the host table. If Telnet Security is enabled the host must be included as
part of the host table. Default is disabled, which allows access from all hosts.
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G10G-527-2-0 V01.00 F31 01:45:14
-------------------------------MANAGEMENT IP CONFIGURATION---------------------
In-band Manager MAC Address 00 40 2A 02 2C D8
Manager MAC Address (In-band) 00 40 2A 02 2C D8
Manager Port Status UP
1) Manager IP Address 172.016.142.239
Subnet Mask 255.255.000.000
Default Gateway 172.016.001.001
2) Manager Port Both User and Net Ports
3) Manager VLAN Tagging Disabled
4) Manager VLAN ID 0
5) Test IP Address 000.000.000.000
Test Subnet Mask 255.255.255.000
6) Test Port Both User and Net Ports
7) Telnet Security Disabled
8) Reply to Broadcast Ping Disabled
Select [1-8]:
------------------------------------Messages-----------------------------------