2 port vlan id translation table, Figure 5-8. port vlan id translation table, Port vlan id translation table – CANOGA PERKINS 9145E10G NID Software Version 1.0 User Manual
Page 72
9145E10G NID Software User’s Manual
Port Information
Port Configuration
60
5.2.3.2 Port VLAN ID Translation Table
The 9145E10G has the ability to translate customer VLAN Tag IDs on Service frames. Use the
Port VLAN ID Translation Table to configure outgoing packets to receive a new tag based on the
current outermost tag. The tag is changed in both directions.
To Configure VLAN Translations, from the VLAN Configuration menu, select Port VLAN Transla-
tion Table (2) and press Enter. The Port VLAN ID Translation Table (Figure 5-1.) opens.
1. Enable VLAN Translation - - Type 1 and press Enter. Use the Space Bar to cycle
between Yes and No.
2. Add/Delete/Modify VLAN Translation - Type 2 and press Enter. Type in the In VLAN
number and press Enter. Then type in the Out VLAN number and press Enter. The In
VLAN/Out VLAN number combination will be added to the list on the screen, in numerical
order.
3. Check If VLAN In Translation Table - Type 3 and press Enter. Type in the VLAN num-
ber. A message will open at the bottom of the screen, saying either VLAN xx is not in the
table or VLAN xx is mapped to VLAN xx.
Figure 5-8. Port VLAN ID Translation Table
Canoga Perkins Corp. Ethernet Network Interface Device 04-JAN-2010
9145E10G-527-2-0 V01.00 F31 01:45:14
----------------------------PORT VLAN ID TRANSLATION TABLE----------------------
Page 1 of 3 Total 91 entries
User <=> Network User <=> Network User <=> Network User <=> Network
---------------- ---------------- ---------------- ----------------
10 <=> 1000 20 <=> 1010 30 <=> 1020 40 <=> 1030
11 <=> 1001 21 <=> 1011 31 <=> 1021 41 <=> 1031
12 <=> 1002 22 <=> 1012 32 <=> 1022 42 <=> 1032
13 <=> 1003 23 <=> 1013 33 <=> 1023 43 <=> 1033
14 <=> 1004 24 <=> 1014 34 <=> 1024 44 <=> 1034
15 <=> 1005 25 <=> 1015 35 <=> 1025 45 <=> 1035
16 <=> 1006 26 <=> 1016 36 <=> 1026 46 <=> 1036
17 <=> 1007 27 <=> 101 37 <=> 1027 47 <=> 1037
18 <=> 1008 28 <=> 1018 38 <=> 1028 48 <=> 1038
19 <=> 1009 29 <=> 1019 39 <=> 1029 49 <=> 1039
1) Enable VLAN Translation: Yes
2) Add/Delete/Modify VLAN Translation
3) Check If VLAN In Translation Table
Select [1-3]:
CTRL-D: page down, CTRL-U: page up, CTRL-T: toggle view from user/network
------------------------------------Messages-----------------------------------