About the manual, How this manual is organized, Preface – CANOGA PERKINS 9145E10G NID Software Version 1.0 User Manual
Page 3
9145E10G NID Software User’s Manual
i
About the Manual
This manual provides instructions on the configuration and operation of the 9145E10G Network
Interface Device (NID) version 1.0 software. The 9145E10G NID can be managed through the
VT-100 terminal using the RS-232 serial port, through an Ethernet connection using a Telnet ter-
minal emulation program, or using SNMP.
How this Manual is Organized
This document contains both information and procedures organized in roughly chronological
order. Starting from an introduction to the Advanced 9145E10G software, it continues with sys-
tem requirements, initial implementation, and continued operation.
The document includes the following components:
•
Chapter 1, Introduction to the 9145E10G Software
provides basic information about the
software and navigation.
•
Chapter 2, Getting Started
describes how to set up and get started using the 9145E10G.
•
Chapter 3, System Configuration
describes how to configure the software management
features.
•
Chapter 4, Diagnostics
describes how to configure and perform routine network diagnos-
tics.
•
Chapter 5, Port Information
describes the User port, Network port, Multipurpose port, and
the Management UTP port.
•
Chapter 6, System Alarms & Logs
describes how to configure System Alarms and Logs.
•
Chapter 7, Utilities
describes various system utilities.
•
Chapter 8, Software Upgrade
describes how to upgrade the NID software.
•
Chapeter 9, Manging Logged in Users
•
Chapter 10, Link OAM
describes the Operations, Administration, and Maintenance func-
tions, such as remote fault indication and remote loopback control, as specified by the
IEEE 802.3ah standard.
Preface