CANOGA PERKINS 9145EMP NID Software Version 3.1 - Manual (Page 120)

9145EMP NID Software User’s Manual CoS Configuration
CoS Queues Configuration
108
can be selected. To enable or disable a queue, see “Queues Configuration on
Network Ports” on page 116.)
• If you selected C-VID in step 1, you can use the User Port Tagged Packet Classi-
fier Mapping screen (C-VID Mode) to select a port, change the queue assignment,
and view the C-VID. See the steps in “Mapping a Queue on the User Port in C-
VID Mode” on page 109.
Figure 10-5 User Port Tagged Packet Classifier Mapping (PCP Mode)
4. To map a PCP to a queue on the Network port, type 3 and press Enter. The Network Port
Tagged Packet Classifier Mapping screen (Figure 10-6) opens.
5. To change the queue setting, enter the PCP number and use the Space bar to select a
queue. Press Enter to confirm the setting. (Only a queue that is enabled can be selected.
Canoga Perkins Corp. Ethernet Network Interface Device 20-MAR-2010
Model 9145EMP-761-0-0 V11.03 F11 Canoga 9145EMP 32 device 21:52:40
------- USER PORT TAGGED PACKET CLASSIFIER MAPPING (PCP MODE) ------------------
PCP Queue
--- ---
0 Q1
1 Q1
2 Q1
3 Q1
4 Q2
5 Q2
6 Q3
7 Q3
Select [0-7]:
------------------------------------Messages-----------------------------------