3 delete a maintenance association, 4 modify a maintenance association – CANOGA PERKINS 9145EMP NID Software Version 3.1 User Manual
Page 153
Service OAM
9145EMP NID Software User’s Manual
Maintenance Associations
141
10. To modify an attribute value, type the number of the attribute and press Enter, or press
Esc to return to the Maintenance Association list.
Figure 11-13 Create a New Maintenance Association screen
11.4.3 Delete a Maintenance Association
When you delete a Maintenance Association, all MEPs/MIPs associated with it are also deleted.
A VLAN Multiplexing record cannot be deleted if it has a MA or a MEG associated with it.
1. On the Maintenance Association List screen (Figure 11-12), type D and press Enter. The
current Maintenance Association is highlighted.
2. Press the Space bar to scroll through the list and highlight the Maintenance Association
you wish to delete.
3. Press Enter to delete the highlighted Maintenance Association. You are prompted to con-
firm the deletion.
11.4.4 Modify a Maintenance Association
1. On the Maintenance Association List screen (Figure 11-12), type E and press Enter. The
current MA is highlighted.
2. Press the Space bar to scroll through the Maintenance Associations and highlight an MA
to modify.
3. When the item you want to modify is highlighted, press Enter. The Maintenance Associa-
tions Attributes screen (Figure 11-14) opens.
4. To change the CCM interval, type 1 and press Enter. The CCM interval is the interval at
which CCMs are sent by a MEP. Select 1 sec, 10 sec, or 100 ms, and press Enter.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
Model 9145EMP-761-0-0 V07.11 F7 Canoga 9145EMP 32 device 00:25:46
-------------------------CREATE A NEW MAINTENANCE ASSOCIATION---------Display 1
1) MD ID: 0
2) MA ID: 0
3) Name:
4) VLAN Tag Type: S-TAG
5) VLAN Multiplexing record 281
6) CCM Interval: 1 sec
7) Permissions (Sender ID): None
Select [1-7] for attributes
------------------------------------Messages-----------------------------------