CANOGA PERKINS 9145EMP NID Software Version 3.1 - Manual (Page 83)

Port Information 9145EMP NID Software User’s Manual
Link Aggregation
71
Aggregation Indicates that the port is part of an aggregation group. Type 8 and press Enter.
Press the Space bar to select Yes or No and press Enter.
Synchronization Indicates whether the LACP synchronization with the peer port is complete.
Type 9 and press Enter. Press the Space bar to select Yes or No and press Enter.
Collecting Indicates whether the collection function (that is, the receive direction of the port) is
active. Type 10 and press Enter. Press the Space bar to select Yes or No and press Enter.
Distributing Indicates whether the distribution function (that is, the transmit direction of the port)
is active. Type 11 and press Enter. Press the Space bar to select Yes or No and press Enter.
Defaulted Indicates that the synchronization process for this port is still in process and that the
default settings for the port are used in the interim. Type 12 and press Enter. Press the Space
bar to select Yes or No and press Enter.
Expired Indicates that the LACP information is expired and the synchronization stage will be
restarted. Type 13 and press Enter. Press the Space bar to select Yes or No and press Enter.
5.6.1.3 Configuring a Static Link Aggregation
A static LAG is fixed and will not send LACP frames or process-received LACP frames; it will not
dynamically exchange information with the LAG partner. Use the following steps to configure a
static LAG.
1. In the LAG Aggregation Group Attributes screen (Figure 5-15), type 1 and press Enter.
Set the Admin status to Enabled.
2. In the LAG Ports List screen (Figure 5-16), type E and press Enter to edit port attributes
for the selected Network port, for example, NET1.
3. In the LAG Port Attributes screen for the selected Network port, set the Assignment
status (1) to Assigned and the LACP activity field (4) to Passive, as in Figure 5-20.
Figure 5-20 Configuring Static LAG: LAG Port Attributes screen
Canoga Perkins Corp. Ethernet Network Interface Device 02-JUN-2010
Model 9145EMP-761-0-0 V07.11 F7 15:19:08
-----------------------------LAG PORT ATTRIBUTES-------------------------------
Interface: NET1
Churn is detected: No
Aggregate or Individual: Ind 1) Assignment status: Assigned
Assigned Assigned Assigned
Actor oper. key: 32769 2) Actor port priority: 32768
Oper LACP activity: Active 3) Actor admin key: 1
Oper LACP timeout: Long 4) LACP activity: Passive
Passive Passive Passive
Oper aggregation: No 5) LACP timeout: Long
Oper synchronization: Yes 6) View/modify partner attributes
Oper collecting: No
Oper distributing: No
Oper defaulted: Yes
Oper expired: No
Select [1-6] for attributes:
------------------------------------Messages-----------------------------------