CANOGA PERKINS 9145EMP NID Software Version 3.1 - Manual (Page 68)

9145EMP NID Software User’s Manual Port Information
Network-side Configuration
56
5.3 Network-side Configuration
From the Port Information screen (Figure 5-1), select Network Side Configuration (3) and press
Enter. The Network Side Forwarding Configuration screen (Figure 5-7) opens.
NOTE: If you are unable to change the active network interface, ensure that you do not
have VLAN MUX records, a SOAM entity attached, or Link OAM enabled.
1. Press Enter to highlight the Active network Interface.
2. Press the Space bar to change the setting: Net1, Net2, or LAG. When you are finished,
press Enter.
3. Press Esc to return to the Port Information screen.
Figure 5-7 Network Side Forwarding Configuration screen
Canoga Perkins Corp. Ethernet Network Interface Device 21-MAR-2010
Model 9145EMP-761-0-0 V07.11 F7 Canoga 9145EMP 32 device 00:19:38
--------------------- NETWORK SIDE FORWARDING CONFIGURATION --------------------
1) Active network interface: NET1
Press ENTER to start editing