CANOGA PERKINS 9145EMP NID Software Version 3.1 - Manual (Page 26)

9145EMP NID Software User’s Manual System Configuration
IP/SNMP Agent Configuration
14
9. Reply to Broadcast Ping Enables or disables the 9145EMP reply to ICMP packets with
a broadcast IP Host Address in the Manager IP subnet. Broadcast Ping replies are an
ICMP packet and are rate limited to 100pps. Default is disabled.
3.1.2 Auxiliary IP Configuration
On the IP/SNMP Agent Configuration screen (Figure 3-2), type 2 and press Enter. The Auxiliary
IP Configuration screen (Figure 3-4) opens.
The Auxiliary IP is an additional IP address that is provided for testing and connectivity only. It
allows the 9145EMP to be PINGed without allowing Telnet or Management access that could be
disruptive. The Auxiliary IP rate is limited to 500 pings per second. This allows connectivity and
rudimentary performance testing from subscriber/user VLANs without compromising network
security.
To configure the parameters, type the corresponding number and press Enter. Enter data or
press the Space bar to view the configuration choices for the parameters described below.
Separate tagging configuration is necessary for User Side and Network side ports. All ports on
the user side must share the same tagging configuration.
Figure 3-4 Auxiliary IP Configuration screen
1. Auxiliary IP Address Sets the 9145EMP Auxiliary IP Address.
Auxiliary Subnet Mask Sets the 9145EMP Auxiliary IP Subnet Mask.
2. Inband Auxiliary Port Describes the Auxiliary IP address ports. Options are: USR 1,
USR 2, USR 3, USR 4, Network Port, or Disabled.
3. Auxiliary VLAN Tagging on Network ports Describes the tagging mode for the frames
sent and received when the Auxiliary IP address is configured on the Network Port.
Options are: Untagged, S-Tagged, or Double Tagged.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145EMP-761-0-0 V07.11 F7 Canoga 9145EMP 32 device 11:45:26
-------------------------------AUXILIARY IP CONFIGURATION----------------------
1) Auxiliary IP Address 000.000.000.000
Auxiliary Subnet Mask 255.255.255.000
2) Auxiliary Port No Ports Allowed
3) Aux VLAN Tagging on Network ports Untagged
4) Aux C-VLAN ID on Network ports 0
5) Aux S-VLAN ID on Network ports 0
6) Aux VLAN Tagging on User ports Untagged
7) Aux C-VLAN ID on User ports 0
8) Allow Any Vlan Disabled
9) Aux IP Rate Limiting Enabled
Select [1-9]: