CANOGA PERKINS 9145EMP NID Software Version 3.1 - Manual (Page 56)

9145EMP NID Software User’s Manual Diagnostics
Latency/Jitter Test
44
Far End DSCP Sent This is the programmed DSCP.
Far End DSCP Rcvd The DSCP that was received at the destination 9145EMP.
Local DSCP Sent The programmed DSCP value is put back into the packet at the far end for
the return trip.
Local DSCP Rcvd This is the DSCP that was received at the end of the Round Trip.
Figure 4-3 Latency/Jitter Test screen
Type the number of the function you wish to change, and press Enter. Once the settings have
been entered, type 13 and press Enter to begin or end testing. Press Esc to return to the Diag-
nostics menu.
Configuration items are as follows:
1. To IP Address The remote agent IP Address.
2. From IP Address The originating IP address that the 9145EMP will place into the test
packets. Press the Space bar to scroll through Auto Selection, Management IP, Test IP,
and Aux IP.
The Auto Selection setting will start first with the Test IP. If the To IP Address is in the Test
Network Subnet, the Test IP will be used in the packet. If the Test IP is not available or the
To IP Address is not in the Test Network Subnet, the Aux IP is checked. If the Aux IP is
not available or the To IP Address is not the Aux Network Subnet, the Manager IP is
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145EMP-761-0-0 V07.11 F7 11:20:59
-
-----------------------------------LATENCY/JITTER TEST----------------------------------
Test IP Addr 0.0.0.0
Test VLAN IDs C/S 0 /0 Round Trip Packets 0
Test Duration 00:00 Dropped Packets 0
Minimum Latency (ms) 0.000000 Minimum Jitter (ms) 0.000000
Average Latency (ms) 0.000000 Average Jitter (ms) 0.000000
Maximum Latency (ms) 0.000000 Maximum Jitter (ms) 0.000000
Far End PBit Sent 0/Rcvd ? Local PBit Sent ?/Rcvd ?
Far End DSCP Sent 0/Rcvd ? Local DSCP Sent ?/Rcvd ?
1) To IP Addr 0.0.0.0 5) Packet Timeout sec (1-10) 3
2) From IP Addr Auto Selection 6) Packet Priority (0-7) 0
3) Test C-VLAN 0 7) Packet DSCP Code (0-63) 0
4) Test Packets per sec 1 8) Packet DF Bit Clear
9) Test Duration min:sec (0=forever) 0
10) Min Test Payload Size (40 - 9950) 40
11) Max Test Payload Size (40 - 9950) 40
12) Start/Stop Test
Select [1-12]: