CANOGA PERKINS 9145EMP NID Software Version 3.1 - Manual (Page 196)

9145EMP NID Software User’s Manual VLAN Multiplexing
VLAN Multiplexing Configuration
184
3. To change the Administrative State, type 1 and press Enter. Press the Space bar to select
Up or Down, and press Enter.
4. To change the statistics display, type 2 and press Enter. Press the Space bar to select S-
VLAN, C-VLAN, or Disabled, and press Enter.
If you set the statistics mode for a service multiplexing record to C-VLAN then you can
see the service multiplexing statistics detailed at C-VLAN level (as in Figure 12-9).
5. To change the S-Tag P-Bits value, type 3 and press Enter. Press the Space bar to select
Static or Copy from Ingress, and press Enter.
6. To view or modify the C-VLAN list, type 4 and press Enter. The VLAN Multiplexing
Record C-VLAN List screen (Figure 12-6) opens.
• To add a C-VLAN, type 1 and press Enter. You are prompted to type 1-4094,
(U)ntagged, or (P)riority tagged and press Enter. Enter the C-VLAN IDs that you
wish to be included in the service multiplexing, one by one. Priority VLAN tagged
frames and untagged frames can be explicitly included in the VLAN multiplexing
record as well.
• To delete a C-VLAN, type 2 and press Enter. You are prompted to type 1-4094,
(U)ntagged, or (P)riority tagged and press Enter. Delete the C-VLAN IDs that you
do not wish to include in the service multiplexing.
Press Esc to return to the Modify VLAN Multiplexing Record screen.
7. When you are finished making changes, type A to accept.
8. Press Esc to return to the VLAN Multiplexing Record List screen.
Figure 12-5 Modify VLAN Multiplexing Record screen
Canoga Perkins Corp. Ethernet Network Interface Device 21-MAR-2010
Model 9145EMP-761-0-0 V07.11 F7 Canoga 9145EMP 32 device 00:27:33
-----------------------MODIFY VLAN MULTIPLEXING RECORD--------------------------
S-VLAN ID: 2
User Interface: USR1
Network Interface: NET1
Name: xxx
Multiplexing type: Service Mux
Operational state: DOWN
1) Administrative state: UP
2) Statistics: Disabled
3) S-Tag P-Bits: Static
Static P-Bits Value: 3
4) View/modify C-VLAN List
Select [1-4] for attributes:
------------------------------------Messages-----------------------------------