CANOGA PERKINS 9145EMP NID Software Version 3.1 - Manual (Page 38)

9145EMP NID Software User’s Manual System Configuration
Security Configuration
26
NOTE: The setting of the Master Trap Control overrides all other trap settings.
Figure 3-15 Trap Configuration screen
3.3 Security Configuration
The 9145EMP can be configured for Strong passwords. Use the Security Configuration screen to
set or change the Password Configuration and the Lockout/Logout Configuration.
From the System Configuration screen, select Security Configuration (3). The Security
Configuration screen (Figure 3-16) opens.
3.3.1 Password Configuration
Select the Password Configuration item to change by typing the corresponding number. Press
Enter to close the editing function and then press Esc to return to the System Configuration
screen. The 9145EMP permits strong passwords as follows:
1. Minimum Length The minimum number of alpha-numeric characters of a password.
Enter a value between 0 and 15. A setting of 0 will allow you to log in without a password.
2. Minimum Alpha Characters The minimum number of alpha characters a password must
contain. Valid alpha characters are a-z (lower case) and A-Z (capitalized). Enter a value
between 0 and 15.
3. Minimum Numeric Characters The minimum number of numeric characters a password
must contain. Valid numeric characters are 0-9. Enter a value between 0 and 15.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145EMP-761-0-0 V07.11 F7 Canoga 9145EMP 32 device 15:52:50
-----------------------------------TRAP CONFIGURATION--------------------------
1) Master Trap Control Log Only
2) User Port Link Traps Both Log And Send
3) Network Port Link Traps Both Log And Send
4) Remote Fault Traps Both Log And Send
5) Link Loss Forwarding Traps Both Log And Send
6) Cold Start Traps Both Log And Send
7) Authentication Traps Both Log And Send
8) Diagnostic Traps Both Log And Send
9) Entity Configuration Traps Both Log And Send
10) Fan/Power/Temperature Traps Both Log And Send
Both Log And Send
12) SOAM Traps Both Log And Send
Select [1-12]: