CANOGA PERKINS 9145EMP NID Software Version 3.1 - Manual (Page 177)

Service OAM 9145EMP NID Software User’s Manual
Maintenance Intermediate Points
165
Figure 11-34 Create a New Maintenance Intermediate Point screen (Y.1731)
11.7.3 Delete a Maintenance Intermediate Point
When you delete a Maintenance Intermediate Point, it is also deleted from the AIS client lists.
1. On the Maintenance Intermediate Point List screen (Figure 11-32), type D and press
Enter. The current MIP is highlighted.
2. Press the Space bar to scroll through the list and highlight the entry you wish to delete.
3. Press Enter to delete the highlighted MIP. You are prompted to confirm the deletion.
11.7.4 Modify a Maintenance Intermediate Point
1. On the Maintenance Intermediate Point List screen (Figure 11-32), type E and press
Enter. The current MIP is highlighted.
2. Press the Space bar to scroll through the list and highlight the entry to modify.
3. When the MIP you want to modify is highlighted, press Enter. The Maintenance Interme-
diate Point Attributes screen for that MIP (Figure 11-35 for 802.1ag or Figure 11-36 for
Y.1731) opens.
4. To change the Admin Status, type 1 and press Enter. Select Enabled or Disabled and
press Enter. When a MIP is disabled, it does not process any requests it receives.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
Model 9145EMP-761-0-0 V07.11 F7 Canoga 9145EMP 32 device 05:15:27
-----------------CREATE A NEW MAINTENANCE INTERMEDIATE POINT--------------------
1) MEG ID 0
2) MIP ID: 0
3) Admin status: Disabled
Select [1-3] for attributes:
------------------------------------Messages-----------------------------------