CANOGA PERKINS 9145EMP NID Software Version 3.1 - Manual (Page 195)

VLAN Multiplexing 9145EMP NID Software User’s Manual
VLAN Multiplexing Configuration
183
10. To accept the new VLAN Multiplexing Record settings, type A and press Enter. The Mod-
ify VLAN Multiplexing Record screen (Figure 12-5) opens.
11. To modify an attribute value, type the number of the attribute and press Enter, or press
Esc to return to the VLAN Multiplexing Record List screen.
Figure 12-4 Create a New VLAN Multiplexing Record screen
12.2.2 Delete a VLAN Multiplexing Record
NOTE: A VLAN multiplexing record cannot be deleted if SOAM entities are con-
figured on it.
1. On the VLAN Multiplexing Record List screen (Figure 12-3), type D and press Enter. The
current VLAN Multiplexing Record is highlighted.
2. Press the Space bar to scroll through the list and highlight the record you wish to delete.
3. Press Enter to delete the highlighted record. You are prompted to confirm the deletion.
12.2.3 Modify a VLAN Multiplexing Record
1. On the VLAN Multiplexing Record List screen (Figure 12-3), type E and press Enter. The
current record is highlighted.
2. Press the Space bar to scroll through the list and highlight the record to modify. When the
record you want to modify is highlighted, press Enter. The Modify VLAN Multiplexing
Record screen (Figure 12-5) opens.
Canoga Perkins Corp. Ethernet Network Interface Device 21-MAR-2010
Model 9145EMP-761-0-0 V07.11 F7 Canoga 9145EMP 32 device 00:26:41
--------------------CREATE A NEW VLAN MULTIPLEXING RECORD-----------------------
1) S-VLAN ID: 10
2) User Interface: USR1
3) Name: Name1
4) Multiplexing type: Service Mux
5) Administrative state: UP
6) Statistics: Disabled
7) S-Tag P-Bits: Copy from ingress
Static P-Bits Value
Select [1-7] for attributes, (A) to Accept:
------------------------------------Messages-----------------------------------