CANOGA PERKINS 9145EMP NID Software Version 3.1 - Manual (Page 149)

Service OAM 9145EMP NID Software User’s Manual
Maintenance Domains
137
4. In the Name field, type the name of the new domain and press Enter. (You can also con-
figure an MD without a name. See, for example, MD ID 2 in Figure 11-9). The Permis-
sions (Sender ID) field is highlighted.
5. In the Permissions (SenderID) field, select Chassis, Manage, ChassisManage, or None
and press Enter. This value indicates what is to be included in the Sender ID TLV trans-
mitted in CCMs, LBMs, LTMs, and LTRs:
• None: The Sender ID TLV is not sent. This is the default value.
• Chassis: the Chassis ID Length, Chassis ID Subtype, and Chassis ID fields of the
Sender ID TLV are sent
• Manage: the Management Address Length and Management Address of the
Sender ID TLV are sent
• ChassisManage: the The Chassis ID Length, Chassis ID Subtype, Chassis ID,
Management Address Length and Management Address fields are sent.
In order for a Sender ID TLV to be included in a packet, both Sender applicability attri-
butes and Permissions attributes must be configured.
6. To accept the new Maintenance Domain settings, type A and press Enter. The Modify
Maintenance Domain screen (Figure 11-11) opens.
7. To modify an attribute value, type the number of the attribute and press Enter, or press
Esc to return to the Maintenance Domain List screen.
Figure 11-10 Create a New Maintenance Domain screen
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
Model 9145EMP-761-0-0 V07.11 F7 Canoga 9145EMP 32 device 00:25:46
-----------------------CREATE A NEW MAINTENANCE DOMAIN--------------------------
1) MD ID: 0
2) Level: 0
3) Name:
4) Permissions (Sender ID): None
Enter number in range 1 - 65535.
------------------------------------Messages-----------------------------------