CANOGA PERKINS 9145EMP NID Software Version 3.1 - Manual (Page 123)

CoS Configuration 9145EMP NID Software User’s Manual
CoS Queues Configuration
111
10.3.2 Untagged Packet Classifier Mapping
Untagged packet classifier mapping is supported on user ports only. There are three classifica-
tion modes for untagged packets: IP Precedence, DSCP, and AFEF.
1. To configure queue mapping for untagged packets, from the Class of Service Queue Con-
figuration screen (Figure 10-3), type 2 and press Enter. The User Port Untagged Packet
Classifier Configuration screen opens (Figure 10-8).
Figure 10-8 User Port Untagged Packet Classifier Configuration screen
2. To select a classification mode for the User side, type 1 and press Enter. Press the Space
bar to select IP Precedence, DSCP, or AFEF and press Enter.
3. To assign a default queue for unclassified frames, type 2 and press Enter. Press the
Space bar to select LLQ, Q3, Q2, or Q1 and press Enter. (Only a queue that is enabled
can be selected. To enable or disable a queue, see “Queues Configuration on Network
Ports” on page 116.)
4. To set classifier mapping, type 3 and press Enter.
• If you selected IP Precedence in step 2, Figure 10-9 opens. See the section “IP
Precedence Mode” on page 112.
• If you selected DSCP mode in step 2, Figure 10-10 opens. See the section “DSCP
Mode” on page 113.
• If you selected AFEF in step 2, Figure 10-11 opens. See the section “AF/EF
Mode” on page 114.
5. Press Esc to return to the Class of Service Queue Configuration screen.
Canoga Perkins Corp. Ethernet Network Interface Device 21-MAR-2010
Model 9145EMP-761-0-0 V11.03 F11 Canoga 9145EMP 32 device 21:36:59
-------------------- USER PORT UNTAGGED PACKET CLASSIFIER CONFIGURATION --------
1) Classification Mode IP Precedence
2) Default Queue for Unclassified Frames LLQ
3) Set classifier mapping
Select [1-3]:
------------------------------------Messages-----------------------------------