CANOGA PERKINS 9145EMP NID Software Version 3.1 User Manual
Page 27
![background image](/manuals/651394/27/background.png)
System Configuration
9145EMP NID Software User’s Manual
IP/SNMP Agent Configuration
15
4. Auxiliary C-VLAN ID on Network ports Sets the C-VLAN ID value (between 1 and
4094). Valid if the Auxiliary VLAN Tagging mode on Network ports is set to Double
Tagged.
5. Auxiliary S-VLAN ID on Network Sets the S-VLAN ID value (between 1 and 4094). Valid
if the Auxiliary VLAN Tagging mode on Network ports is set to Double Tagged or S-
Tagged. The value defaults to 0 if any of the other type of tagging modes are selected.
6. Auxiliary VLAN Tagging on User ports Describes the tagging mode for the frames sent
and received when the Auxiliary IP address is configured on any of the User Ports.
Options are Untagged or C-Tagged.
7. Auxiliary C-VLAN ID on User ports Sets the C-VLAN ID value (between 1 and 4094) for
the C-Tags on User Ports. Valid if the Auxiliary VLAN Tagging mode on User Ports is set
to C-Tagged.
8. Allow any VLAN If this option is enabled, frames addressed to the Auxiliary IP address
are processed regardless of their VLAN tagging. All responses on such frames are
tagged with the received VLAN ID. Frames initiated by the NID will be still tagged with the
configured encapsulation (Options 3 to 7 above). If this option is disabled, received
frames will only be processed if they have the VLAN ID set on this screen.
9. Auxiliary IP Rate Limiting Specifies whether the maximum limit of 500 frames per
second is enforced for frames received on the Auxiliary IP address.