CANOGA PERKINS 9145EMP NID Software Version 3.1 - Manual (Page 146)

9145EMP NID Software User’s Manual Service OAM
SOAM Configuration
134
Figure 11-7 SOAM System Level Configuration screen
7. If you chose Locally Assigned in step 4, type 3 and press Enter. The Chassis ID Value
field is highlighted.
8. Enter string in the Chassis ID Value field and press Enter.
9. To enable Sender ID TLV to be sent for connectivity check (CC) messages, type 4 and
press Enter. Select Enabled or Disabled and press Enter.
10. To enable Sender ID TLV to be sent for loopback messages (LBM), type 5 and press
Enter. Select Enabled or Disabled and press Enter.
11. To enable Sender ID TLV to be sent for a linktrace message (LTM), type 6 and press
Enter. Select Enabled or Disabled and press Enter.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
Model 9145EMP-761-0-0 V07.11 F7 Canoga 9145EMP 32 device 05:15:27
-----------------------SOAM SYSTEM LEVEL CONFIGURATION--------------------------
1) Service OAM: Enabled
SENDER ID TLV
2) Chassis ID Format: 7 - Locally assigned
3) Chassis ID Value:
Management Address Domain: SNMPoverIPv4
Management Address: 172.16.140.100
Sender ID TLV applicability:
4) CC: Disabled 5) LBM: Disabled 6) LTM: Disabled
7) PORT ID TLV configuration
Select [1-7]:
------------------------------------Messages-----------------------------------