Cisco 3825 - Manual (Page 163)

A-31
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
gsm-abis local
gsm-abis local
To configure the local parameters required to establish an Internet Protocol/User Datagram Protocol
(IP/UDP) backhaul connection, use the gsm-abis local Interface configuration command.
gsm-abis local [ip-address] [port]
Syntax Description
Defaults There are no default settings or behaviors.
Command Modes Interface configuration
Command History
Examples The following example shows how to configure the local parameters:
Router(config)# interface Serial10/1/0.0
Router(config-if)# encapsulation gsm-abis
Router(config-if)# gsm-abis local 10.10.10.2 5502
Related Commands
ip-address (Optional) The IP address for the entry you wish to establish.
port (Optional) The port you want to use for the entry you wish to establish.
Release Modification
12.4(2)MR This command was introduced.
Command Description
gsm-abis remote Configures the remote parameters for an IP/UDP backhaul
connection.