Cisco 3825 - Manual (Page 243)

A-111
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show umts-iub traffic
show umts-iub traffic
To display traffic rates, in bits per second, at 1 second, 5 seconds, 1 minute, 5 minutes, and 1 hour
intervals for UMTS data transmitted and received over the backhaul, use the show umts-iub traffic
command in privileged EXEC mode.
show umts-iub traffic
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History
Examples The following is an example of the output generated by this command.
Router# show umts-iub traffic
UMTS-Iub(ATM1/0/0.1): traffic (1sec/5sec/1min/5min/1hr) units(bps)
compression traffic( 2400/ 2496/ 2495/ 2496/ 203)
decompression traffic( 81120/ 81120/ 80989/ 81006/ 6287)
UMTS-Iub(ATM1/0/0.2): traffic (1sec/5sec/1min/5min/1hr) units(bps)
compression traffic( 0/ 0/ 4/ 4/ 1)
decompression traffic( 0/ 0/ 19/ 19/ 2)
Related Commands
Release Modification
12.4(12)MR This command was introduced.
Command Description
clear umts-iub Clears the statistics displayed.