Cisco 3825 - Manual (Page 120)

4-62
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Chapter 4 Configuring the Cisco 3825 Mobile Wireless Edge Router in a RAN-O Solution with the Command-Line
Saving Configuration Changes
redundancy
mode y-cable
standalone
!
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-participate wic 2
network-clock-participate aim 1
network-clock-select 1 E1 0/1/0
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
no ip dhcp use vrf connected
!
!
no ip domain lookup
!
!
!
!
!--- The use of CRC4 or NO-CRC4 is dependent on the configuration of the end user
equipment.
!
!
!
controller E1 0/0/0
framing NO-CRC4
clock source internal
channel-group 0 timeslots 1-31
description Short Haul Abis E1 NO-CRC4 framing
!
controller E1 0/0/1
clock source internal
channel-group 0 timeslots 1-31
description Short Haul Abis E1 CRC4 framing (default)
!
controller E1 0/1/0
channel-group 0 timeslots 1-31
description Backhaul IP E1
!
controller E1 0/1/1
mode atm aim 1
description Short Haul Iub E1
!
controller E1 0/2/0
mode atm aim 1
description Short Haul Iub E1
clock source internal
!
class-map match-any abis
match ip dscp 15!
!
policy-map llq-policy
class abis
priority percent 99
class class-default
bandwidth remaining percent 1
queue-lmit 45
!
!
interface Loopback0
description O&M IP Globally Routable