Cisco 3825 - Manual (Page 240)

A-108
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show umts-iub peering
Peer Info:
No Backhaul Interface ======= 5 packets
Backhaul Encap Failures ===== 2 packets
RX Ctrl Paks ================ 62 packets
RX Ctrl Bytes =============== 2078 bytes
TX Ctrl Paks ================ 62 packets
TX Ctrl Bytes =============== 1365 bytes
Out Of Sequence Paks ======== 0 packets
Backhaul QOS classify drops = 0 packets
Version Mismatch ============ 0 packets
Shorthaul Mismatch ========== 0 times
Peer Errors:
No Pak Mem ================== 0 (times)
No Event Mem ================ 0 (times)
No VC Mem =================== 0 (times)
No Alarm Link Mem =========== 0 (times)
No Print Buf ================ 0 (times)
Unknown Msg Type ============ 0 (times)
Unexpected Attrs ============ 0 (times)
RX Msg Length Err =========== 0 (times)
Retransmit Counter Err ====== 0 (times)
NULL Retransmit Err ========= 0 (times)
PVC Delete Mismatch ========= 0 (times)
PVC Add Existing ============ 0 (times)
Example 3 with IMA
Router# show umts peering
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0): Peering Information
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0): Local (20.20.20.21:6666) States:
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0): Connect State: OPEN
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0): Redundancy State: ACTIVE
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0): Version: 4
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0): Alarm State:
UMTS-Iub(ATM0/0/0 - ATM0/0/0): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/0/1 - ATM0/0/1): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0): Remote (20.20.20.20:6666) States:
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0): Version: 4
UMTS-Iub(ATM0/IMA0 - ATM0/IMA0): Alarm State:
UMTS-Iub(ATM0/0/0 - ATM0/0/0): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/0/1 - ATM0/0/1): RX(NO ALARM) TX(NO ALARM)
Note In the previous output, the local shorthaul/interface name appears before the dash (–), and the remote
shorthaul/interface name appears after the dash (–).
Example 4 with Alternate Backhaul (192.168.10.2 to 192.168.10.1)
Router# show umts peering
UMTS-Iub(ATM0/IMA0): Peering Information
UMTS-Iub(ATM0/IMA0): Local (20.20.20.21:6666) States:
UMTS-Iub(ATM0/IMA0): Connect State: OPEN
UMTS-Iub(ATM0/IMA0): Redundancy State: ACTIVE
UMTS-Iub(ATM0/IMA0): Version: 3
UMTS-Iub(ATM0/IMA0): Alarm State:
UMTS-Iub(ATM0/0/0) ID(1): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/0/1) ID(2): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/IMA0): Remote (20.20.20.20:6666) States:
UMTS-Iub(ATM0/IMA0): Version: 3