Cisco 3825 - Manual (Page 225)

A-93
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show l2tp tunnel
show l2tp tunnel
To display basic information about all L2TP tunnels, use the show l2tp tunnel command in the user
EXEC mode.
show l2tp tunnel
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Command History
Usage Guidelines Use the show l2tp tunnel command to display information about all active tunnels using L2TP.
Examples The following is sample output from the show l2tp tunnel command on a device with active L2F and
L2TP tunnels:
Router# show l2tp tunnel
L2TP Tunnel Information Total tunnels 1 sessions 4
LocID RemID Remote Name State Remote Address Port Sessions L2TP Class/
VPDN Group
2220 55756 mwr2 est 99.99.99.99 0 4 l2tp_default_cl
Router#
Router#
Router#
Router#
Related Commands
Release Modification
11.2 This command was integrated into Cisco IOS Release 12.4(12)MR2.
12.1(1)T This command was enhanced to display Point-to-Point Protocol over
Ethernet (PPPoE) information.
12.1(2)T This command was enhanced to display PPPoE session information on
actual Ethernet interfaces.
12.4(12)MR2 This command was integrated into Cisco IOS Release 12.4(12)MR2.
Command Description
show l2tp domain Displays all VPDN domains and DNIS groups configured on the
network access server (NAS).
show l2tp group Displays a summary of the relationships among VPDN groups and
customer/VPDN profiles, or summarizes the configuration of a VPDN
group including DNIS/domain, load sharing information and current
session information.
show l2tp history failure Displays the content of the failure history table.