Umts-iub congestion-control – Cisco 3825 User Manual
Page 256

A-124
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
umts-iub congestion-control
umts-iub congestion-control
To enable control under the UMTS shorthaul interface, use the umts-iub congestion-control Interface
configuration command.
umts-iub congestion-control
Syntax Description
This command has no arguments or keywords.
Defaults
There are no default settings or behaviors.
Command Modes
Interface configuration
Command History
Examples
The following example shows how to enable congestion control under UMTS shorthaul interface:
Router(config-if) umts-iub congestion-control
Related Commands
Release
Modification
12.4(4)MR1
This command was introduced.
Command
Description
umts-iub congestion control
priority
Configures the congestion control priority under UMTS.