Cisco 3825 - Manual (Page 185)

A-53
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
ipran-mib threshold-acceptable
ipran-mib threshold-acceptable
Use the ipran-mib threshold-acceptable command in the global configuration mode to specify a level
of traffic below which the instances of the cirbhBackHaulRcvdUtilState and
cirbhBackHaulSentUtilState objects are marked as “acceptable.” All changes to this threshold takes
affect at the end of the current interval. The value for this object must be less than the values specified
by ipran-mib threshold-warning and ipran-mib threshold-overloaded command keywords. This
parameter corresponds to the cirbhBackHaulAcceptableThreshold object.
ipran-mib threshold-acceptable [20-100 Utilization (percent)]
Syntax Description
Defaults 60 percent.
Command Modes Interface configuration
Command History
Examples
Router# config t
Router(config)# ipran-mib threshold-acceptable 50
Router(config)# ipran-mib threshold-acceptable 70
Router(config)# no ipran-mib threshold-acceptable
Router(config)# exit
Related Commands
ipran-mib
threshold-acceptable ipran-mib threshold-acceptable percent.
Release Modification
12.4(2)MR1 This command was introduced.
12.4(9)MR Support for utilization notification was removed. This command is supported to
maintain compatibility.
Command Description
ipran-mib
threshold-overloaded Specifies the amount of traffic that indicates the backhaul is
overloaded.
ipran-mib
threshold-warning Specifies the amount of traffic that indicates the backhaul is carrying
traffic sufficient to impact performance, but is not overloaded.
ipran-mib
backhaul-notify-interval Specifies the interval used to suppress the generation of utilization
notifications.