Cisco 3825 - Manual (Page 210)

A-78
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show connection
show connection
To display the status of interworking connections, use the show connection command in the privileged
EXEC mode.
show connection [all | element | id ID | name name | port port]
Syntax Description
Command Modes Privileged EXEC
Command History
Examples The following example shows the local interworking connections on a router:
Router# show connection
ID Name Segment 1 Segment 2 State
========================================================================
1 conn1 ATM 1/0/0 AAL5 0/100 ATM 2/0/0 AAL5 0/100 UP
2 conn2 ATM 2/0/0 AAL5 0/300 Serial0/1 16 UP
3 conn3 ATM 2/0/0 AAL5 0/400 FA 0/0.1 10 UP
4 conn4 ATM 1/0/0 CELL 0/500 ATM 2/0/0 CELL 0/500 UP
5 conn5 ATM 1/0/0 CELL 100 ATM 2/0/0 CELL 100 UP
all (Optional) Displays information about all interworking connections.
element (Optional) Displays information about the specified connection element.
id ID (Optional) Displays information about the specified connection identifier.
name name (Optional) Displays information about the specified connection name.
port port (Optional) Displays information about all connections on an interface. (In
Cisco IOS Release 12.0S, only ATM, serial.)
Release Modification
12.1(2)T This command was introduced as show connect (FR-ATM).
12.0(27)S This command was integrated into Cisco IOS Release 12.0(27)S and updated
to show all ATM, serial, and Fast Ethernet interworking connections.
12.2(25)S This command was integrated into Cisco IOS Release 12.2(25)S.
12.4(2)T This command output was changed to add Segment 1 and Segment 2 fields
for Segment state and channel ID.
12.0(30)S This command was integrated into Cisco IOS Release 12.0(30)S.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.4(8) This command was integrated into Cisco IOS Release 12.4(8).
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.4(11)T This command was integrated into Cisco IOS Release 12.4(11)T.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.