Cisco 3825 User Manual
Page 196
A-64
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
mpls ip
For an LC-ATM interface, the no form of this command prevents the establishment of label virtual
circuits (LVCs) beginning at, terminating at, or passing through the interface.
Examples
The following example shows that label switching is enabled on the specified Ethernet interface:
Router# config t
Router(config)# configure terminal
Router(config-if)# interface Ethernet 0/1/0
Router(config-if)# mpls ip
Router(config-if)# exit
Router(config)# exit
Related Commands
Command
Description
mpls ldp maxhops
Limits the number of hops permitted in an Label Switched Path (LSP)
established by the downstream-on-demand method of label
distribution.
show mpls interfaces
Displays information about one or more interface that has been
configured for label switching.