Cisco 3825 - Manual (Page 200)

A-68
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
redundancy
redundancy
To access the command mode that allows you to configure aspects of redundancy, use the redundancy
command in global configuration mode.
redundancy
Syntax Description This command has no parameters; it invokes the redundancy mode.
Defaults There are no default settings or behaviors.
Command Modes Global configuration
Command History
Examples The following example enables redundancy mode:
Router(config)# redundancy
Router(config-r)
Related Commands
Release Modification
12.2(8)MC2 This command was introduced.
12.2(15)MC1 This command was incorporated.
12.3(11)T This command was incorporated.
12.4(2)MR This command was incorporated.
Command Description
mode y-cable Invokes y-cable mode.
standalone Indicates whether the Cisco 3825 router is being used as a standalone
device and manually sets the relays.
standby use-interface Designates a loopback interface as a health or revertive interfaces.