Cisco 3825 - Manual (Page 58)

3-8
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Chapter 3 First-Time Configuration
Completing the Configuration
If you answer no, the configuration information that you entered is not saved, and you return to the router
enable prompt. Type setup to return to the System Configuration Dialog.
If you answer yes, the configuration is saved, and you return to the EXEC prompt.
Step 2 When the messages stop displaying on your screen, press Return to get the command line prompt.
The 3825-1> prompt indicates that you are now at the CLI and you have just completed a basic router
configuration. However, this is not a complete configuration. You must configure additional parameters
by using the Cisco IOS software CLI as described in
Chapter 4, “Configuring the Cisco 3825 Mobile
Wireless Edge Router in a RAN-O Solution with the Command-Line Interface.”