Cisco 3825 - Manual (Page 232)

A-100
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show redundancy
show redundancy
To display information about the current redundant configuration and recent changes in states, use the
show redundancy command in privileged EXEC mode.
show redundancy
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History
Usage Guidelines In the standby group name group-name command, if you omit the group-name or if you enter a group
name that does not begin with 1 or 2, the configuration will fail and there will be a mismatch in the
information displayed by the show redundancy and show standby commands.
Examples The following is an example of the output generated by this command.
Router# show redundancy
MWR3825 is the Active Router
Previous States with most recent at bottom
INITL_INITL Dec 31 19:00:00.000
LISTN_INITL Feb 28 19:00:15.568
LISTN_LISTN Feb 28 19:00:15.568
SPEAK_LISTN Feb 28 19:00:18.568
SPEAK_SPEAK Feb 28 19:00:18.568
STDBY_SPEAK Mar 19 08:54:26.191
ACTIV_SPEAK Mar 19 08:54:26.191
ACTIV_STDBY Mar 19 08:54:26.191
ACTIV_ACTIV Mar 19 08:54:26.191
INITL_ACTIV Mar 19 08:56:22.700
INITL_INITL Mar 19 08:56:22.700
INITL_LISTN Mar 19 08:56:28.544
LISTN_LISTN Mar 19 08:56:28.652
LISTN_SPEAK Mar 19 08:56:31.544
SPEAK_SPEAK Mar 19 08:56:31.652
SPEAK_STDBY Mar 19 08:56:34.544
SPEAK_ACTIV Mar 19 08:56:34.544
STDBY_ACTIV Mar 19 08:56:34.652
ACTIV_ACTIV Mar 19 08:56:34.652
INITL_ACTIV Mar 19 10:20:41.455
INITL_INITL Mar 19 10:20:41.455
INITL_LISTN Mar 19 10:20:49.243
Release Modification
12.2(8)MC2 This command was introduced.
12.2(15)MC1 This command was incorporated.
12.3(11)T This command was incorporated.
12.4(2)MR This command was incorporated.