Cisco 3825 - Manual (Page 247)

A-115
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
snmp-server enable traps ipran
snmp-server enable traps ipran
To enable all ipran notifications via Simple Network Management Protocol (SNMP) notifications (traps)
available on your system, use the snmp-server enable traps ipran command in global configuration
mode. To disable ipran alarm-gsm notifications, use the no form of this command.
snmp-server enable traps ipran
no snmp-server enable traps ipran
Related Commands This command has no arguments or keywords.
Defaults This command is disabled by default. No notifications are sent.
Command Modes Global configuration
Command History
Examples The following is an example of the output generated by this command.
Router(config)# snmp-server enable traps ipran
Related Commands
Release Modification
12.4(2)MR1 This command was introduced.
Command Description
snmp-server enable traps
ipran alarm-gsm Provides information alarms associated with GSM-Abis interfaces.
snmp-server enable traps
ipran alarm-umts Provides information alarms associated with UMTS-Iub interfaces.
snmp-server enable traps
ipran util Provides information on backhaul utilization.