Cisco 3825 - Manual (Page 244)

A-112
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show xconnect all
show xconnect all
To display information about xconnect attachment circuits and pseudowires (PWs), use the show
xconnect all command in the privileged EXEC mode.
show xconnect {all | interface interface | peer ip-address {all | vcid vcid}} [detail]
Syntax Description
Command Modes Privileged EXEC
Command History
all Displays information about all xconnect attachment circuits and PWs.
interface
interface Displays information about xconnect attachment circuits and PWs on the specified
interface. Valid values for the interface argument are as follows:
• atm number—Displays xconnect information for a specific ATM interface or
subinterface.
• atm number vp vpi-value—Displays virtual path (VP) xconnect information
for a specific ATM virtual path identifier (VPI). This command does not
display information about virtual connection (VC) xconnects using the
specified VPI.
• atm number vp vpi-value/vci-value—Displays VC xconnect information for a
specific ATM VPI and virtual circuit identifier (VCI) combination.
• ethernet number—Displays port-mode xconnect information for a specific
Ethernet interface or subinterface.
• fastethernet number—Displays port-mode xconnect information for a specific
Fast Ethernet interface or subinterface.
• serial number—Displays xconnect information for a specific serial interface.
• serial number dlci-number—Displays xconnect information for a specific
Frame Relay data-link connection identifier (DLCI).
peer ip-address
{all | vcid vcid} Displays information about xconnect attachment circuits and PWs associated with
the specified peer IP address.
• all—Displays all xconnect information associated with the specified peer IP
address.
• vcid vcid—Displays xconnect information associated with the specified peer IP
address and the specified VC ID.
detail (Optional) Displays detailed information about the specified xconnect attachment
circuits and PWs.
Release Modification
12.0(31)S This command was introduced.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.4(11)T This command was integrated into Cisco IOS Release 12.4(11)T.
12.2(33)SRB This command was integrated into Cisco IOS Release 12.2(33)SRB.
12.4(16)MR This command was integrated into Cisco IOS Release 12.4(16)MR.