KEYENCE LK-CC100/DN100 User Manual
Page 24
2-10
2
2 Connecting to CC-Link
• n: varies according to the station number of the LK-CC100.
• m (1 to 12): corresponds to the OUT number. m = 1 for OUT01, m = 2 for OUT02, etc.
Read
control
buffer
RY (n+16*m+3)
OUTm_TIM_ON_REQ
• Requests timing ON to OUTm at the
rising edge from OFF (0)
ON (1).
• Ends the request at the falling edge
from ON (1)
OFF (0).
RY (n+16*m+4)
System reserved
RY (n+16*m+5)
OUTm_TIM_OFF_REQ
• Requests timing OFF to OUTm at the
rising edge from OFF (0)
ON (1).
• Ends the request at the falling edge
from ON (1)
OFF (0).
RY (n+16*m+6)
System reserved
RY (n+16*m+7)
System reserved
RY (n+16*m+8)
OUTm_ZERO_ON_REQ
• Requests zero ON to OUTm at the
rising edge from OFF (0)
ON (1).
• Ends the request at the falling edge
from ON (1)
OFF (0).
RY (n+16*m+9)
System reserved
RY (n+16*m+10) OUTm_ZERO_OFF_REQ • Requests zero OFF to OUTm at the
rising edge from OFF (0)
ON (1).
• Ends the request at the falling edge
from ON (1)
OFF (0).
RY (n+16*m+11)
System reserved
RY (n+16*m+12)
System reserved
RY (n+16*m+13) OUTm_RESET_REQ
• Requests reset to OUTm at the rising
edge from OFF (0)
ON (1).
• Ends the request at the falling edge
from ON (1)
OFF (0).
RY (n+16*m+14)
System reserved
RY (n+16*m+15)
System reserved
RY (n+16*13+0)
System reserved
..
.
System reserved
LK-
CC100
Signal
direction
CC-Link master station
RY
(Remote outputs)
Signal name
Explanation