KEYENCE LK-CC100/DN100 User Manual
Page 44
Advertising
3-8
3
3 Connecting to DeviceNet
Master settings
To connect the LK-DN100 to the DeviceNet master, it is necessary to configure the slave
attribute and memory allocation settings.
Slave attributes
Set the slave settings for communication format, I/O size, etc., on the master. The master
can also be set by reading an EDS file for the LK-DN100 using the master setting
software.
Memory allocation settings
This setting affects non-programmed data exchange between the slave and master. Use
the master setting software to set the memory allocation.
EDS files can be downloaded from the KEYENCE website.
http://www.keyence.co.jp/
Reference
Advertising