Precautions, Installing the scale, Operating the scale – A&D Weighing HW-1200KGV3 User Manual

Page 11: Storing the scale

Advertising
background image

HV-G/HW-G Series

Page 9

4. Caution

4. Precautions

4.1. Installing

the

Scale

Consider the following conditions to get the most from your scale.

Install the scale where the temperature and relative humidity is stable, there is no draft

and a stable power source is available.

Install the scale on a solid and level surface.
Do not install the scale in direct sunlight.
Do not install the scale near heaters or air conditioners.
Do not install the scale where there is flammable or corrosive gas present.
Do not install the scale near equipment which produces magnetic fields.
Do not install the scale where there is apt to be static electricity, in a place where the

relative humidity is lower than 45% RH. Plastic and isolators are apt to be charged with
static electricity.

The display unit is not water resistant. Use the display unit cover to avoid damage.
Do not use an unstable power source.


4.2. Operating

the

Scale

Periodically ensure that the weight value is correct.
Calibrate the scale before using and after moving it to another location.
Do not place anything on the pan which exceeds the weighing capacity.
Do not drop anything upon the pan.
Do not use a sharp instrument such as a pencil to press the keys. Press the keys

gently using your finger.

Pressing

the

ZERO

key before each weighing is recommended to prevent possible

error.

Replace the used batteries with six new ones when the

mark is displayed.

Battery is of type D, Mono, R20P, R20PU or LR20.


4.3. Storing

the

Scale

Do not disassemble the scale.
Do not use solvents to clean the scale. Wipe it with a dry lint free cloth or a lint free

cloth which is moistened with warm water and a mild detergent.

The base unit can be cleaned with gentle running tap water. Do not scratch the base

unit with a brash. Allow the unit to dry before using.

Protect the display unit from dust and water.
Remove the batteries from the display unit when the scale is not to be used for a long

time. If you leave the batteries installed, they may leak and damage the scale.


Advertising