Example of setting parameters – A&D Weighing HW-1200KGV3 User Manual
Page 65
HV-G/HW-G Series
Page 63
16. RS-232C Serial Interface
16.3.2. Example of Setting Parameters
Step 1 Turn off the display.
Press and hold the
ZERO
key and press the
ON/OFF
key.
The function table is displayed.
Step 2 Press the
ENTER
key to display f4 ("Baud rate").
Select a parameter of "Baud rate" with the
∧
key.
Step 3 Press the
ENTER
key to display f5 ("Output
mode").
Select "Command mode ( f5 1 )" with the
∧
key.
Step 4 Press the
ENTER
key to display f15 ("Format").
Select "Format 1 ( f15 0 )" with the
∧
key.
Step 5 Press the
ENTER
key to display end .
Step 6 Press the
ENTER
key to store the new parameters.
The scale returns to the normal weighing mode.
Step 7 When the computer transmits a command, the scale
replies.