A&D Weighing HW-1200KGV3 - Manual (Page 29)

HV-G/HW-G Series Page 27
7. Basic Operation
7.4. Mode Key (Changing Unit and Mode)
Pressing the MODE key changes the display as follows. Refer to function table f3 for
units. Usable units are according to the factory settings.
Pound-Ounce
Accumulation Count
Accumulation Value
M+
or
M+
or
Either function is active.
Comparator (f6 0 ~ f6 7)
Simple Batch Function (f6 8)
Full/Dribble Batch Function (f6 9)
Accumulation Function (f8 1)
Comparator
Upper limit
or
HI
Comparator
Lower limit
Final value or
HI
Preliminary value
Zero band
OK
LO
or
LO
Pound
Ounce
Percentage Mode
Metric kg
Counting Mode
Non metric units
Inactive Comparator (f6)
and
Inactive Accumulation Function (f8 0)
Metric unit
Active Comparator
(f6 0 ~ f6 7)
Active Simple Batch Function or
Active Full/Dribble Batch Function
(f6 8, f6 9)
or
or
If the law in your area
permits, you may use all
of the units. Also, some
dealers may initially turn
off units which are not
regularly used.
No Accumulation Data