A&D Weighing HW-1200KGV3 - Manual (Page 22)

Page 20 HV-G/HW-G Series 6. Description of Each Part
Display and Symbols Description A
Counting mode (Example)
This mode uses the stored unit mass and counts the
number of articles on the pan. The unit is
.
A
A
A
A
Storing the unit mass for the counting mode (Example)
The unit mass is stored, using 20 pieces of samples.
The zero value means that no articles are on the pan.
A
A
A
A
Storing the unit mass for the counting mode (Example)
The unit mass is stored, using 10 pieces of samples.
Sign "-" means that something is placed on the pan.
A
A
A
A
Percentage mode (Example)
This mode uses the stored 100% mass and converts the
weight value to a percentage. The unit is %
.
A
A
A
A
Function table (Example)
This function table sets parameters of items.
ENTER key Selecting an item.
∧ and ＜keys Selecting a parameter of the item.
ENTER key Storing new parameters.
A
A
A
A
A
Preset tare. Entering tare with digital input (Example)
＜
key Selecting the figure to be changed.
∧ key Changing the number of the figure.
ENTER key Storing the new tare.
A
A
A
A
Hold display (Example)
The hold display is set using f12 of the function table.
When the weight value is "nearly-zero" (within the zero
band) or changes more than 25% +30 digits, the hold is
canceled. A
A
A
A
Weighing error
Check the base unit and the weighing pan.
A
A
A
A
Overload display
Remove anything that is on the pan.
A
A
A
A
Calibration error
The calibration mass is too light.
Check the base unit and the weighing pan.
A
A
A
A
The "digit" is a unit of display, and is equivalent to the minimum measurable mass.
The " nearly-zero " or zero band is within ±5 digits from zero point in the unit of kg.