A&D Weighing HW-1200KGV3 - Manual (Page 39)

HV-G/HW-G Series Page 37 11. Upper/Lower Comparator Function
Function table Description A
f6 7
When the weight value becomes stable and not nearly-zero, the
scale compares the value. It does not compare on an unstable
condition. A
A
Caution
The upper limit value (HI) must be greater than the lower limit value (LO).
The parameters of the upper limit value (HI) and the final value (HI) use the
same memory. The parameters of the lower limit value (LO) and the
preliminary value (OK) use the same memory.
The upper/lower comparator function, the simple batch function and the
full/dribble batch function can not be used at the same time because these
parameters use the common memory.
11.1. Preparation (Setting Parameters)
Step 1 Turn off the display.
Press and hold the ZERO key and press the ON/OFF
key. The function table is displayed.
Step 2 Press the
ENTER key to display an item of the
comparator function ( f6 ).
Step 3 Select a parameter of the comparator function
( f6 0 to f6 7 ) with the ∧ key.
Step 4 Press the
ENTER key and the F key to display end .
Press the ENTER key to return to the normal
weighing mode.