Basic operation, Turning the scale on/off and weighing, Type v or type l with ac adapter – A&D Weighing HW-1200KGV3 User Manual
Page 25
HV-G/HW-G Series
Page 23
7. Basic Operation
7. Basic Operation
7.1. Turning the Scale on/off and Weighing
7.1.1. Type V or Type L with AC Adapter
Step 1 Ground the scale.
Step 2 Confirm that nothing is placed on the pan.
Step 3 Confirm that local voltage and receptacle type are correct.
Step 4 The scale turns on/off using the
ON/OFF
key alternately.
Step 5 Check the accuracy of weighing. Allow 30-minute warm up before calibration.
Step 6 With nothing on the pan, press the
ZERO
key to display zero.
Step 7 Place an article to be weighed on the pan gently.
Step 8 Wait for the stability mark to be displayed. Read the weight value.
Step 9 Remove the article from the pan.
Step 10 Turn the scale off using the
ON/OFF
key.
Memo
With the power cord connected, type V is in standby status after the scale is turned off
using the
ON/OFF
key. To shut down the power completely, disconnect the power
cord.
With the AC adapter connected, the power is off at the scale, but not from the AC
adapter, after the scale is turned off using the
ON/OFF
key. To shut down the power
completely, disconnect the AC adapter.