Full/dribble batch function – A&D Weighing HW-1200KGV3 User Manual
Page 42
Page 40
HV-G/HW-G Series
12. Full/Dribble Batch Function
12. Full/Dribble Batch Function
This function changes the scale to a filling machine which sub-divides a bulk product
( like grain) into loads of predetermined and virtually constant mass.
To use this function, set the parameter of the "Comparator function (
f6 9
)",
" Full/dribble batch sub-function (
f10 0
to
f10 3
)" in the function table, final value
(HI), preliminary value (OK) and zero band (LO).
Install option OP-03 or OP-04 to use the relay output of the full/dribble batch function.
In case of building up a filling machine with a scale and hopper, the performance is as
follows:
The settings are stored in the scale even if the power is removed. (Refer to Caution
on the next page.)
Zero band
indicator/
LO relay output
Preliminary value
indicator/
OK relay output
Final value
indicator/
HI relay output
A
A
A
Gross ＜ Zero band
(Zero detection Level)
ON / Make
OFF / Break
OFF / Break
A
Net ＜ Final - Preliminary
OFF / Break
ON / Make
ON / Make
A
Final - Preliminary ≦ Net ＜ Final
OFF / Break
OFF / Break
ON / Make
A
Final ≦ Net
OFF / Break
OFF / Break
OFF / Break
A