Brother WP-700D - Manual (Page 100)

Pitch Relative Amount of Backspace
10 (PICA) 1/6 of a character
12 (ELITE) 1/5 of a character
15 (MICRON) 1/4 of a character
NOTES:
• If №€№l + [BSlI is pressed when the carrier is on the left margin or on the left
end, the typewriter beeps. Pressing ICODEI + M№L| allows the carrier to go
beyond the left margin.
• When the text is displayed (centering, right margin flush, decimal tab or UL
mode) is used to superimpose characters. (See “Permanent
Backspace” next)
Permanent Backspace
^ CODE ^
]
^BACKSPACE ]
+
J ii*’
-1
The permanent backspace function is used to print superimposed characters in
the display mode (centering, right margin flush, decimal tab, and UL mode). For
example, “0” and T are used to produce a “strike-over” zero (0), or “Y” and “=” to
produce a Japanese Yen currency symbol (¥).
1. Type the base character “Y”.
2. Press [CODE I + [BACKSPACE [ ■ The cursor will move one space to the left.
3. Type the character which is to be imposed The base character “Y”, a per­
manent backspace symbol <■■ , and the character to be imposed “=” will be
displayed side by side.
NOTE:
In type mode, you do not need to press . Pressing [BACKSPACE! alone
moves the carrier back to the last character and you can superimpose
another character.
Express Backspace (Y
--------- '1
CODE
L= ■4)
Pressing (CODE) + [EXPRl moves the carrier all the way to the left margin. If you
press + IM WE l \ , the carrier moves all the way to the left end.
NOTES:
• When you have a paragraph indent and the carrier is located at its right,
pressing [CODE I + BOTH once moves the carrier to the paragraph indent;
pressing the same keys again moves the carrier to the left margin.
• If [CQ[%j + lEXPRl is pressed when the carrier is on the left margin or on the
left end, the typewriter will beep.
• Pressing -h [BMi moves the cursor to beginning of the line in the dis­
play mode.
92