Erasing one line, Notes, Relocation of the carrier – Brother WP-700D User Manual
Page 103
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Erasing One Line
T
CODE
'4---------------
UJ
(Ywi
LINE OUT
-AJ
To erase an entire line, position the carrier to the right of the last character on the
line and press I CODE! + limE OUTI. The entire line is erased and you can retype.
NOTES:
• Automatic erasing in progress can be stopped by pressing [COftRECTi.
• Position the cursor to the space immediately to the right of the last character
to be erased while in centering, right margin flush, decimal tab, and UL
modes.
Congratulations on your purchase of this new word
Relocation of the Carrier
f
CODE
------------
V RELOC
J,
After a correction is made in the middle of the current line, pressing IWS3& +
moves the carrier to the position next to the last character.
NOTE:
____
Pressing
[C(^l -h
moves the cursor to the space immediately to the
right of the last data while in the centering, right margin flush, decimal tab,
and UL modes.
95