Accessories, Changing the daisy wheel cassette, Note – Brother WP-700D User Manual
Page 153
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Accessories
Changing the Daisy Wheel Cassette
This word processor uses Brother daisy wheel cassettes, which are print ele
ments housed in clear plastic. This ensures that fingers will never touch the type
face, thereby reducing the risk of damage. One wheei comes with the word
processor. Others providing different type sizes, styles, and character sets are
also available. (See “Compatible Accessories” on page 150.)
NOTE:
If the cassette is not inserted properly or the daisy wheel is not locked in posi
tion, there may be no printout, the printout may be gibberish, or the wheel
may break.
Lift the acoustic cover, and then release the daisy
wheel by pulling the lever toward you.
NOTE:
It is not necessary to remove the ribbon
when replacing the daisy wheel.
Remove the cassette by the “ear” on the top right.
Slide the new cassette into the slot.
NOTE:
Use only Brother Cassette Daisy Wheels and
make sure the cassette is not inserted back
wards. (The “ear” should be on the right.)
Be sure to slide the lever back to its original posi
tion to lock the daisy wheel in place. Press the
lever forward once more to assure the daisy
wheel is properly set, and close the acoustic
cover.
145