J setting up, Removing the packing pieces, Notes – Brother WP-700D User Manual
Page 12: Note, Setting up
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
J
Setting Up
Removing the Packing Pieces
Before you plug in the word processor, open the acoustic cover and remove the
yellow plastic pieces shown in the illustrations below.
NOTES:
• If the plastic pieces are not removed, damage to the word processor may
occur when the power is turned on.
• The yellow plastic pieces do not need to be re-installed unless you are re
packing the word processor for shipping.
Remove the protective cover.
NOTE:
Replace the protective cover when the word
processor is not in use.
Lift the acoustic cover.
Remove the yellow plastic pieces.
NOTE:
Be sure to reinstall the display and cover.
The acoustic cover is equipped with a safety
switch. Your word processor will not operate
unless the acoustic cover is securely closed.