Brother WP-700D - Manual (Page 98)

Changing the Keyboard
Jj
----
(K
If you need to print characters that are not available on the current daisy wheel,
change the daisy wheel and press ICOPEI + B (®)-
KB:I n III -> I
Keyboard Selection Use
I (Standard) English text
II (International) Languages using extra characters
III (Symbol) Mathematical symbols and Greek characters
NOTES:
• Please refer to “Character Keys” on page 128 for details.
• The keyboard setting cannot be changed while in display mode (centering,
right margin flush, decimal tab mode).
• The keyboard setting can be changed in UL mode only before entering text
on the screen.
• The keyboard setting is reset to its default value when you switch the power
off, then on.
Using Shift Lock and Capital Lock
(f=.
Uppercase characters will be printed if you hold awffl down while pressing any
character key.
To type an entire string of uppercase characters, press MIIFTiJMi once. The
SHIFT indicator appears and all characters you type will be uppercase characters.
To cancel, press
If you want to enter strings of capital letters in combination with numbers, press
icoPEl + ( caps I . The CAPS indicator will appear and all alphabetic keys will type
capitals while other keys produce lower case characters. To cancel, press BBM
+ [ caps ! again. When the CAPS indicator is on, holding down imFti temporarily
changes the CAPS indicator to the SHIFT indicator. Pressing i^FTLOCKl in the
same circumstance switches to SHIFT. Pressing MKSi switches back to CAPS.
90