Brother WP-700D - Manual (Page 65)

Paper Size Setting
STYLE BLOCK CTR/RMF SPELL PHRASE FORM PAPER SI/F :INT
H ^DER
" FOOTER
SCALE LINE on / off I
The paper size function aiiows you to specify ail verticai layout parameters except
line spacing (which you may change anywhere on the page). This feature is used
to adjust your top and bottom margins.
1 .
2 .
Press IMENUI to dispiay the menu.
Use and Q to seiect FORM, and press f
return ! or (T1.
Accelerator: Instead of (2), type “F”.
Use (J) and Q3 to seiect paper size and press [ return I .
Accelerator: Instead of (3), type “P”.
The PAPER SIZE screen shown below appears.
PAPER SIZE XXI (LINES) TOP MARGIN X BOTTOM SPACE X
TEXT AREA XX HEADER X FOOTER X
Set each itefii and press t, 1
.
TOP SPACE
Press RETURN to
X
f 1m' sh.
BOTTOM MARGIN X
Settings Definition
PAPER SIZE The total length of the paper. The default, 66 lines, is
suitable for letter-size paper (70 iines for A4-size
paper).
TOP MARGIN The distance between the top edge of the paper and
the header (if present) or the top of the text (when
there is no header). The default is 6 lines, which is one
inch.
HEADER An optionai running header. (See “Header and Footer”
on page 58.)
TOP SPACE The distance between the header (if present) and the
first line of the text. If you store a header, you must
enter a number for this selection.
TEXT AREA The number of lines reserved for the body of the text.
BOTTOM SPACE The distance between the last line of the text and the
footer (if present). If you store a footer, you must enter
a number for this selection.
FOOTER An optionai running footer. (See “Header and Footer”
on page 58.)
BOTTOM MARGIN The distance between the footer (if present) or the last
line of the text and the bottom edge of the paper. The
default is 6 lines, which is one inch.
57